Lumenradio CRMX Aurora

LumenRadio CRMX Aurora Hire in Ibiza

Hire the LumenRadio CRMX Aurora in Ibiza for concerts, weddings, festivals, corporate events and professional lighting productions.

Aurora is a professional single-universe wireless DMX and RDM transceiver. It can operate as either a transmitter or receiver, providing a flexible solution for sending lighting-control data without running a physical DMX cable between the console and the lighting system.

It also supports Art-Net and sACN over Wi-Fi, allowing network lighting data to be converted into CRMX wireless transmission or conventional five-pin DMX.

Professional Wireless DMX Transceiver

The LumenRadio CRMX Aurora can transmit or receive one complete DMX universe.

In transmitter mode, it can take a physical DMX signal or compatible network data and send it wirelessly to CRMX receivers.

In receiver mode, it receives a CRMX signal and converts it back into physical DMX for connection to lighting fixtures, splitters or additional control equipment.

This dual-purpose design makes Aurora suitable for both front-of-house transmission and remote receiving positions.

One Complete DMX and RDM Universe

Aurora supports one universe of DMX and bidirectional RDM communication.

A single universe provides up to 512 DMX channels for controlling compatible lighting equipment such as:

• Moving heads
• LED wash fixtures
• Strobes
• Architectural lighting
• Battery-powered fixtures
• Dimmer systems
• Smoke machines
• Wireless lighting installations

RDM support allows compatible equipment to return information through the wireless connection.

Depending on the lighting console and connected devices, RDM can be used to discover fixtures, change addresses, read status information and configure supported parameters remotely.

Reliable CRMX Wireless Technology

The LumenRadio CRMX Aurora uses LumenRadio’s professional CRMX wireless system in the 2.4 GHz frequency range.

Its wireless transmission includes:

• Five-millisecond latency
• Forward Error Correction
• 128-bit encryption
• Full-universe refresh rates
• Automatic management of radio interference

These technologies are designed to provide stable lighting control in environments where Wi-Fi, Bluetooth and other wireless systems are also operating.

CRMX and W-DMX Compatibility

Aurora works with LumenRadio CRMX equipment and is also compatible with supported Wireless Solution W-DMX G3 and G4s receivers.

This makes it useful for productions containing fixtures or receivers from different professional wireless-DMX ecosystems.

Compatibility should still be checked before the event, particularly when using older receivers, manufacturer-specific implementations or advanced RDM functions.

Art-Net and sACN over Wi-Fi

The LumenRadio CRMX Aurora includes integrated 5 GHz Wi-Fi connectivity.

It can receive Art-Net or sACN lighting data wirelessly and convert it into:

• CRMX wireless DMX
• Physical five-pin DMX
• RDM-compatible control data

Supported network protocols include Art-Net 1–3 and sACN.

This allows a compatible lighting console or control computer to send a universe to Aurora without requiring a physical Ethernet connection to the unit.

The Wi-Fi network should be planned and tested carefully for professional show-critical applications.

Bluetooth Configuration

Aurora includes Bluetooth 5.0 connectivity and can be configured using the LumenRadio CRMX Toolbox application.

The application can be used to manage supported settings from a compatible mobile device.

Configuration options include functions such as:

• Selecting transmitter or receiver operation
• Managing universes
• Checking device status
• Linking compatible receivers
• Configuring wireless settings
• Updating supported device parameters

The front-panel controls can also be used when a mobile device is not available.

Colour Display and Rotary Control

The LumenRadio CRMX Aurora includes a colour screen and rotary control on the front panel.

This provides direct access to operating modes, universe selection, wireless status and configuration settings.

The local interface makes Aurora easier to configure during event setup without requiring a computer or mobile device for every adjustment.

Bidirectional Five-Pin DMX Connection

Aurora includes a five-pin XLR connection that can be used for DMX and RDM input or output, depending on its configured operating mode.

This allows it to function as a protocol converter between:

• Physical DMX
• CRMX wireless DMX
• Art-Net
• sACN
• RDM

For example, it can receive Art-Net over Wi-Fi and output conventional DMX, or receive physical DMX from a console and transmit it through CRMX.

Linking Key Support

The LumenRadio CRMX Aurora supports Linking Key functionality.

A Linking Key can be used to associate compatible receivers with a specific transmitter without relying only on physical linking procedures.

This can simplify preparation of larger wireless systems and help ensure that the correct receivers connect to the intended transmitter.

The function requires compatible LumenRadio devices and appropriate configuration.

Flexible Power Options

Aurora can be powered from standard AC mains through its powerCON TRUE1 connection.

It also supports external DC power between 10 and 18 V, according to the current LumenRadio specification documentation.

An optional V-Lock battery adapter can be used for mobile installations where access to mains power is limited.

This makes the unit suitable for:

• Temporary outdoor positions
• Mobile lighting systems
• Camera and film productions
• Battery-powered installations
• Remote receiver locations

Aurora itself has an IP20 enclosure and therefore requires protection from rain, moisture and exposed outdoor conditions.

Mounting and Rack Options

The LumenRadio CRMX Aurora uses a compact aluminium enclosure measuring approximately 14 × 20 × 4.4 cm.

It includes M10 and ⅜-inch mounting threads and can be installed using compatible rack, wall-mount and battery accessories.

This allows it to be positioned:

• Inside a control rack
• On a truss
• At front of house
• Backstage
• Near lighting fixtures
• Inside a protected technical enclosure

The antenna uses an RP-TNC connector, allowing appropriate compatible antenna configurations.

Ideal for Professional Lighting Productions

The LumenRadio CRMX Aurora is suitable for:

• Concerts
• Festivals
• Weddings
• Corporate events
• Private villas
• Fashion shows
• Theatre productions
• Television and filming
• Temporary architectural lighting
• Battery-powered lighting installations
• Locations where DMX cabling is impractical
• Professional lighting-control networks

It is particularly valuable when a reliable control signal must cross a public area, road, stage, garden or architectural space without installing a long DMX cable.

Aurora or Conventional DMX Splitter?

The LumenRadio CRMX Aurora and a conventional DMX splitter perform different functions.

A splitter takes one physical DMX signal and produces several isolated wired copies.

Aurora sends or receives one universe wirelessly and can convert between physical DMX, CRMX, Art-Net and sACN.

Use a DMX splitter when:

• Several wired branches are required.
• All fixtures are located within practical cable distance.
• Wireless transmission is unnecessary.

Use Aurora when:

• Running a physical DMX cable is difficult or undesirable.
• A remote lighting area must receive wireless control.
• CRMX-compatible fixtures are being used.
• Art-Net or sACN must be converted to wireless DMX.
• A flexible transmitter and receiver is required.

Both devices can be combined in the same professional lighting network.

Complete Wireless DMX Hire

The LumenRadio CRMX Aurora can be hired individually or supplied as part of a complete professional lighting-control package.

Depending on the production, the package can include:

• CRMX receivers
• Wireless DMX-compatible lighting fixtures
• Cameo XNODE 8
• DMX splitter
• grandMA3 onPC system
• LightShark control system
• Five-pin DMX cables
• Three-pin DMX adapters
• EtherCON network cables
• Antennas and mounting accessories
• Battery power accessories
• Moving lights
• LED fixtures
• Delivery and installation
• On-site lighting technician

Every transmitter, receiver, antenna and cable is inspected and tested before delivery.

Our technicians can also prepare the operating mode, universe, receiver linking, Art-Net or sACN settings and wireless position according to the lighting design.

Main LumenRadio CRMX Aurora Features

• Professional wireless DMX/RDM transceiver
• Transmitter and receiver operation
• One complete DMX universe
• CRMX wireless technology
• Compatible with supported W-DMX G3 and G4s receivers
• DMX512 and RDM support
• Art-Net versions 1–3
• sACN support
• Integrated 5 GHz Wi-Fi
• Bluetooth 5.0
• CRMX Toolbox application configuration
• Front-panel colour display
• Rotary configuration control
• Five-pin XLR DMX connection
• Five-millisecond wireless latency
• Forward Error Correction
• 128-bit encryption
• Linking Key support
• RP-TNC antenna connection
• powerCON TRUE1 mains input
• 10–18 V DC power compatibility
• Optional V-Lock battery adapter
• Compact aluminium enclosure
• IP20 rating
• Professional mounting and rack accessories

Hire a LumenRadio CRMX Aurora in Ibiza

White Sound Ibiza provides professional lighting-control and wireless DMX equipment hire throughout Ibiza.

Hire the LumenRadio CRMX Aurora for a concert, wedding, festival, corporate event, villa production or complex lighting installation.

Explore our lighting equipment hire in Ibiza service to discover lighting consoles, wireless DMX systems, network nodes, moving lights and complete professional lighting packages.

Contact our team to check availability and receive a personalised quotation.