Cameo XNODE8

Cameo XNODE 8 Hire in Ibiza

Hire the Cameo XNODE 8 in Ibiza for concerts, weddings, festivals, corporate events and professional lighting productions.

The XNODE 8 is a professional eight-port Ethernet DMX node designed to exchange lighting-control data between Art-Net, sACN and physical DMX networks.

It allows several DMX universes to be transported through one Ethernet network and converted back into conventional DMX connections close to the lighting equipment.

Professional Eight-Port Ethernet DMX Node

The Cameo XNODE 8 provides eight individually configurable DMX ports.

Each port can be configured as an input or output, allowing the node to perform several functions within the same lighting network.

It can be used to:

• Convert Art-Net to DMX
• Convert sACN to DMX
• Convert physical DMX into Art-Net
• Convert physical DMX into sACN
• Distribute up to eight independent universes
• Receive data from lighting consoles
• Send DMX data across an Ethernet network
• Provide RDM communication with compatible equipment

This makes the XNODE 8 suitable for complex lighting systems with several universes and distributed fixture positions.

Up to Eight Independent DMX Universes

The Cameo XNODE 8 can convert and distribute up to eight independent DMX universes.

Each output can be assigned to a different Art-Net or sACN universe.

For example:

• Port 1 can control stage-left fixtures.
• Port 2 can control stage-right fixtures.
• Port 3 can control front lighting.
• Port 4 can control LED fixtures.
• Port 5 can control decorative lighting.
• Port 6 can control strobes.
• Port 7 can control truss lighting.
• Port 8 can control an additional production area.

Unlike a conventional splitter, the eight ports do not have to carry the same universe.

Art-Net and sACN Support

The XNODE 8 supports Art-Net versions 1 through 4 and both release and draft versions of sACN.

These protocols allow several DMX universes to be transmitted over a standard Ethernet network.

This reduces the number of long physical DMX lines required between the lighting console and the stage.

The node can be connected to professional control systems such as:

• grandMA3
• grandMA2
• ChamSys
• Avolites
• LightShark
• Lighting-control computers
• Art-Net-compatible software
• sACN-compatible software

Compatibility and universe configuration must be checked according to the selected console and network setup.

Eight Configurable DMX Ports

The Cameo XNODE 8 provides eight five-pin XLR DMX ports.

Each port is individually optically isolated and can be configured as either a DMX input or DMX output.

Optical isolation helps prevent electrical faults or interference on one DMX line from affecting the remaining ports or the Ethernet network.

The five-pin format follows the professional DMX512 connection standard.

Three-pin fixtures can be connected using appropriate professional adapters or DMX cables.

RDM Compatibility

The XNODE 8 supports DMX and RDM according to the ANSI E1.11 and ANSI E1.20 standards.

RDM allows compatible lighting fixtures to communicate information back to the controller through the same DMX connection.

Depending on the console and fixture, RDM can be used to:

• Discover connected devices
• Change DMX addresses
• View fixture status
• Read operating information
• Identify devices
• Monitor certain errors
• Configure supported parameters remotely

All elements in the signal chain must support RDM for bidirectional communication to work correctly.

Input and Output Conversion

The Cameo XNODE 8 is bidirectional.

Its ports can receive physical DMX from a console or controller and convert that signal into Art-Net or sACN data.

This is useful when:

• A conventional DMX console must feed a network.
• A DMX signal needs to be transported over Ethernet.
• A backup console uses physical DMX outputs.
• Several control positions must be integrated.
• Signals must be distributed between front of house and the stage.

The ports can also convert network data back into conventional DMX outputs for the lighting fixtures.

Data Merging

The XNODE 8 can merge data when two controllers send information to the same universe.

This function can be useful in systems involving:

• Main and backup lighting consoles
• Architectural and show-control systems
• Multiple control sources
• Temporary production networks

The final behaviour depends on the selected merge mode and network configuration.

The system should be programmed and tested before the event to avoid conflicting control data.

OLED Display and Direct Controls

The Cameo XNODE 8 includes a 124 × 64-pixel OLED display.

The display provides access to network settings, port assignments and device-status information.

A rotary encoder allows technicians to navigate through the menu and edit parameters directly from the front panel.

Each DMX output also has a shortcut button for rapid assignment of its Art-Net or sACN universe.

This allows basic changes to be made without connecting a computer.

Web Interface

The node includes an integrated web interface.

Technicians can access the interface through the network to:

• View device status
• Configure IP settings
• Assign universes
• Change Art-Net settings
• Change sACN settings
• Configure individual ports
• Update the firmware
• Check network information

This is particularly useful when the node is installed inside a rack or when several devices are managed from one control computer.

DHCP and Network Configuration

The Cameo XNODE 8 supports DHCP for automatic IP-address assignment.

It can also be integrated into lighting networks using manually configured addresses where required.

Its Ethernet functions include automatic negotiation and Auto MDI-X, simplifying connection to compatible switches and computers.

Professional lighting networks should still be planned carefully, especially when several nodes, consoles and devices share the same infrastructure.

Professional Rack Format

The XNODE 8 uses a standard 19-inch rack enclosure.

Its shallow 1U-style format allows it to be installed inside a professional lighting-control rack together with:

• Network switches
• Wireless DMX systems
• DMX splitters
• Lighting computers
• Power distribution
• grandMA processing equipment
• Backup-control hardware

Rack mounting protects the unit during transport and helps keep the lighting network organised.

PowerCON Input and Output

The Cameo XNODE 8 includes Neutrik powerCON input and output connections.

The power output allows compatible equipment to be linked within an appropriately designed rack system.

The unit operates from 100 to 240 V AC at 50 or 60 Hz and consumes approximately 10 W.

Power linking must always remain within the limits of the connectors, cabling and connected equipment.

Ideal for Professional Lighting Productions

The Cameo XNODE 8 is suitable for:

• Concerts
• Festivals
• Weddings
• Corporate events
• Theatre productions
• Fashion shows
• Television productions
• Private villa events
• Large decorative installations
• Multi-universe lighting systems
• Distributed stage networks
• Main and backup console systems

It is particularly valuable when several universes must travel between front of house, backstage, truss positions and other event areas.

XNODE 8 or DMX Splitter?

The Cameo XNODE 8 and a DMX splitter perform different jobs.

A conventional splitter takes one physical DMX universe and creates several isolated copies of that same signal.

The XNODE 8 transports and converts network lighting data and can provide up to eight separately assigned universes.

Use a DMX splitter when:

• One universe must be divided into several branches.
• No Art-Net or sACN network is required.
• A simple isolated physical distribution is sufficient.

Use the XNODE 8 when:

• Several universes are required.
• The console outputs Art-Net or sACN.
• DMX must be transported through Ethernet.
• Bidirectional RDM communication is required.
• Individual ports need independent universe assignments.

Both devices can be used together in larger lighting systems.

Complete Lighting Network Hire

The Cameo XNODE 8 can be hired individually or supplied as part of a complete professional lighting-control system.

Depending on the production, the package can include:

• grandMA3 onPC system
• LightShark control system
• Professional Ethernet switch
• Cameo SB 6 DUAL splitter
• Wireless DMX equipment
• Five-pin and three-pin DMX cables
• EtherCON network cables
• DMX terminators
• Moving lights
• LED fixtures
• Strobes
• Truss structures
• Power distribution
• Delivery and installation
• On-site lighting technician

Every node, connector and cable is inspected and tested before delivery.

Our technicians can also prepare the IP addresses, Art-Net or sACN universes, DMX-port directions, RDM configuration and network topology according to the lighting design.

Main Cameo XNODE 8 Features

• Professional eight-port Ethernet DMX node
• Up to eight independent DMX universes
• Art-Net versions 1 through 4
• sACN release and draft compatibility
• DMX512 support
• RDM support
• Eight five-pin XLR DMX ports
• Each port configurable as input or output
• Individual optical isolation on every DMX port
• Art-Net and sACN to DMX conversion
• DMX to Art-Net and sACN conversion
• Data-merging capability
• Integrated OLED display
• Rotary encoder for direct configuration
• Dedicated shortcut button for each DMX output
• Integrated web interface
• Firmware updates through the web interface
• DHCP compatibility
• Neutrik powerCON input and output
• Standard 19-inch rack format
• Approximate power consumption of 10 W
• Suitable for professional multi-universe lighting systems

Hire a Cameo XNODE 8 in Ibiza

White Sound Ibiza provides professional lighting-control and event equipment hire throughout Ibiza.

Hire the Cameo XNODE 8 for a concert, wedding, festival, corporate event or complex multi-universe lighting installation.

Explore our lighting equipment hire in Ibiza service to discover lighting consoles, DMX nodes, signal distribution, moving lights and complete professional lighting packages.

Contact our team to check availability and receive a personalised quotation.